eBay Classifieds » All ads » For sale » 

cnc lathe in Newark

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "cnc lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1996 Citizen CINCOM M20 (CNC Swiss Type Lathe)

    1996 Citizen CINCOM M20 CNC Swiss Type Lathe CNC Control: Mitsubishi Meldas 530LHC Max. Machining Diameter: .787" (20mm) Max. Machining Length per Chucking: 12.6" Main Spindle Indexing: Full "C" Axis Sub Spindle Indexing: 15 degree Spindle Speeds (Main Spindle Drive): 200 - 8100 rpm Spindle Speeds (Back Spindle): 180 - 7200 rpm Rotary Tool Spindle (Gang Plate): 250 - 5000 rpm Rotary Tool Spindle (Turret): 320 - 6300 rpm Backworking (Max. Chucking Dia): .787" (20mm) Backworking (Max. ...

  2. 2008 Okuma Model Captain L370BBM CNC Live Milling Big Bore Lathe

    Okuma Model Captain L370BBM CNC Live Milling Big Bore Lathe New 2008 Specifications: Max Diameter Bar Capacity: 2.75" Max Swing Over Bed: 20.86" Max Turning Diameter: 14.57" Max Machining Length: 19.6" X-Axis Travel: 10.2" Z-Axis Travel: 20.4" Spindle Motor: 30 HP Spindle Speed: 3800 RPM Spindle Bore: ...

  3. 1997 Haas HL-4 CNC Lathe * Nice Clean Machine!

    1997 Haas HL-4 CNC Lathe Specifications: Control Haas X-Axis Travel 11.3" Z-Axis Travel 34" Rapid Traverse Rates 710 ipm Chuck Size 10" Max Bar Capacity 2.5" Max Turning Dia 14.5” Max Turning Length 34" Spindle Speeds 3,400 rpm Spindle Motor 30 hp. Draw Tube Bore 3" Turret Stations 12 Machine Weight 14,000 lbs. Equipped With: 10” 3 Jaw Hydraulic Chuck 5C Collet Chuck Manuals *Power On – 4,592 hrs. *Cycle Start – 1,118 hrs. PRICE: $29,500.00 F.O.B. TX IN VERY CLEAN CONDITION!

  4. 1989 OKUMA LB-15 CNC LATHE

    1989 OKUMA LB-15 CNC LATHE (3 Machines Available) EQUIPPED WITH: 10" CHUCK - 3 JAW A2-6" SPINDLE NOSE 2" SPINDLE BORE OSP 5000 CONTROL 20.47" CENTERS RAPID TRAVERSE 472" TRAVEL X / Z 9.01"/26.38" 12 POSITION TOOL TURRET TAILSTOCK CHIP CONVEYOR 6.89" MAXIMUM CUTTING DIAMETER 4200 RPM 20 HP MOTOR APPROX. DIMENSIONS: 105" x 73" APPROX. WEIGHT: 9200 PRICE: $20,000.00 F.O.B. OH IN GOOD CONDITION!

  5. IKEGAI FX20N 2 Axis CNC Lathe With New Fanuc CNC Control * Nice!

    IKEGAI FX20N 2 Axis CNC Lathe The FX20N was built under strict design and manufacturing standards. This machine is extremely accurate and features high speed cutting capability. Bi-directional indexing can be programmed to shorten non-cutting time. The super-precision main spindle is highly accurate and is supported by a double-row cylindrical roller bearing and single-row angular contact ball bearings making it free from vibration. FEATURES •Fanuc OT ...

  6. MAZAK SLANT TURN 40 CNC TURNING CENTER * Excellent Machine!

    MAZAK SLANT TURN 40 CNC TURNING CENTER Year: 1987 Specifications: Chuck Size:........................15.0 in Bar Capacity:......................3.15 in # Axis:.................................2 Power:................................40.0 hp RPM:..................................2200 rpm Turning Dia:........................21.6 in Swing:.................................21.6 in Centers:..............................60.0 in Description: 1987 Mazak Slant 40N CNC Lathe With Mazatrol T-2 ...

  7. 2007 Haas SL-10B Big Bore CNC Lathe * Low Hours * Excellent Machine!

    2007 Haas SL-10B Big Bore CNC Lathe Specifications: Swing Over Bed: 16.25" Maximum Bar Capacity: 2.00" Between Centers: 16.50" Maximum Cutting Diameter: 11.00 Maximum Cutting Length: 14.00" Spindle Speeds: 6000 RPM X Axis Travel: 6.25" Z Axis Travel: 14.00" Main Motor Drive: ...

  8. HARDINGE QUEST SUPER PRECISION CNC GANG TOOL LATHE

    HARDINGE QUEST SUPER PRECISION CNC GANG TOOL LATHE SPECIFICATIONS: FANUC 21i-TB CNC CONTROL SWING OVER COVER" 11.76 RAPID TRAVERSE:(X,Z): 708/945 IPM TRAVELS X: 11.96" Z: 11.06" SPINDLE A2-4 COLLET CLOSER STROKE: .5" 5 HP / 8,000 RPM CHIP CONVEYOR BARFEED *POWER ON HOURS: 3,618 Price: $45,000.00 IN EXCELLENT CONDITION! Location: MI

  9. Ex-Cell-O X-1100 (CNC Vertical Turret Lathe)

    Ex-Cell-O X-1100 CNC Vertical Turret Lathe Control: Fagor 8055 Table (Chuck) Diameter: 30" Swing: 42" Table Motor: 100 HP Max. Workpiece Height: 28" Number of Turret Stations: 6 Tools Tool Holder Taper: ISO-50 Machine Dimensions: 134"L x 100"W x 136"H -EQUIPPED WITH- Air Conditioner for Electrical Cabinet Full C-Axis Thru Spindle Coolant (live tools) Spindle Orientation Electric Torque Limit Complete splash guards ***THIS MACHINE IS A RETROFIT FROM MANUAL TO CNC** ...

  10. 2004 Haas TL-2 (CNC Tool Room Lathe)

    2004 Haas TL-2 CNC Tool Room Lathe Control: Haas Swing Over Ways: 19" Swing Over Cross Slide: 11.1" Max Cutting Diameter: 16" Centers Distance: 48" Spindle Nose: A2-6 Spindle Bore: 3" Spindle Speed: 1,800 RPM Spindle Motor: 12 HP Tailstock Taper: MT#4 Tailstock Stroke: 33.5" Machine Dimensions: 101"L x 55"W x 78"H Machine Weight: 5,000 LBS More Info: http://2spade.com/2004HaasTL2.html

  11. 1960 American 3220 (CNC Engine Lathe)

    1960 American 3220 CNC Engine Lathe Maximum Swing: 44" Swing Over Carriage: 34" Distance Between Centers: 120" Spindle Speeds: 8-1200 RPM Spindle Hole Diameter: 3" Spindle Drive Motor: 50 HP -EQUIPPED WITH- Power Mate (Automation America) CNC Control (Retrofit 2004) Note: CNC Control, Relays & Wiring Upgraded in 2004 Retrofit! The drive motor reconditioned, a new spindle drive motor added, Tailstock Rebuilt & Z-Axis ballscrew recondition in 2004 More Info: http://2spade ...

  12. 1993 Citizen CINCOM L16 (CNC Swiss Type Lathe)

    1993 Citizen CINCOM L16 CNC Swiss Type Lathe Control: Cincom System Max. Machining Diameter .687" Max. Machining Length per One Chuck: 8.1" Max. Drilling Diameter: Up to .394" Spindle Speed: 200 - 10,000 rpm Back Work Max. Chucking dia. of Pick off Spindle .687" Back Work Pick off Spindle Speed: 200 - 5000 rpm Back Work Pick off Spindle Motor: 2 HP Back Work Min. Spindle Index: 1 Deg Number of OD Turn Tool Stations: 7 Number of Front ID Tool Stations: 3 Number of Back ID Tool Stations: 3 Number of ...

  13. 2006 HAAS SL-30T (CNC TURNING CENTER)

    2006 HAAS SL-30T CNC TURNING CENTER 20 HP VECTOR DRIVE SPINDLE 10" X 20" MAX. 20" SWING 2” BAR CAPACITY HYBRID TURRET (6)BOLT ON–(6)VDI40 STATIONS 50-4000 RPM 8" HYDRAULIC CHUCK 15” COLOR MONITOR USB PORT 1 MG MEMORY OPTIONS INCLUDED: HYBRID 12 STATION TURRET LATHE TOOL PRESETTER LATHE CHIP AUGER SYSTEM IPS-L INTUITIVE PROGRAMMING SYSTEM PTS20 FULLY PROGRAMMABLE HYDRAULIC TAILSTOCK PARTS CATCHER

  14. 2003 Romi M-20 x 80” CNC Lathe

    2003 Romi M-20 x 80” CNC Lathe Specifications: Swing over Bed: 20.47” Swing over Cross Slide: 10.24” Swing over Carriage wings: 17.72” Travels: X = 11.02”, Z = 72” - 80” Bed Width: 13.39” Length: 13.22” Head stock: Spindle Nose: A2-6” Spindle Hole Diameter: 2.56” Max Spindle Speed: 3000 RPM Chuck: 12” Manual Chuck with a 2.75” Hole Rapid Travers: X = 295 IPM, Z = 394 IPM Tailstock: Quill Travel: 5.12 Quill Diameter: 3.15 Quill Taper: 4 Turret: 8 Tool Turret AC Spindle Motor: 11 / 15 HP Power: 230v 3 ...

  15. 2006 ROMI C420 CNC & MANUAL LATHE * PRISTINE CONDITION!

    2006 ROMI C420 CNC & MANUAL LATHE SIEMENS CNC CONTROL SPECIFICATIONS: 17″ SWING OVER BED, 40″ CENTER DISTANCE, 8.03″ SWING OVER CROSS SLIDE, 15.8″ SWING OVER SADDLE, 2.6″ HOLE THRU SPINDLE, 40-3,000 RPM SPINDLE SPEEDS, 24 FEEDS, 7.5 HP SPINDLE MOTOR. DIMENSIONS: 71.” X 31″ X 49″ WEIGHT 4,500 LBS. EQUIPPED WITH: SIEMENS CNC CONTROL ABILITY TO RUN IN MANUAL OPERATION AS WELL AS CNC 10″ CHUCK ALORIS TOOL POST ALL MANUALS!!!!!!! PRICE: $39,500.00 IN PRISTINE CONDITION! LOCATION: MIDWEST

  16. 1995 Citizen CINCOM F12 (CNC Swiss Lathe, Twin Turret)

    1995 Citizen CINCOM F12 CNC Swiss Lathe, Twin Turret Control: Fanuc OT Max Turning Diameter: 12MM (.472") Max Chucking Length: 125MM (4.921") Number of Tool Stations: 10 Spindle Speeds: 220 - 10,000 RPM Spindle Motor: 5 HP Rotary Tool Spindle Speeds: 200 - 3,000 RPM(low), 1,000 - 6,400 RPM (high) Maximum Drilling Diameter: 8MM (.315") Max Tap or Die Diameter: 6MM (.236") Tool Shank Size: 1/2" -EQUIPPED WITH- synchronous Rotary Guide Bushing 360 Degree Main Spindle Indexing SMW Bar ...

  17. 2009 Hurco TM8 (CNC Turning Center)

    2009 Hurco TM8 CNC Turning Center Control: Max Max Swing Over Bed: 21.6" Max Swing Over Carriage: 11.8" Cross Travel (X-Axis): 8" Longitudinal Travel (Z-Axis): 20" Rapid Traverse Rate (X-Axis): 750 IPM Rapid Traverse Rate (Z-Axis): 945 IPM Turret Tool Positions: 10 Total Bar Capacity: 2" Spindle Nose: A2-6 Spindle Speed Range: 4,800 RPM Spindle Horsepower: 22 HP Approximate Machine Dimensions: 116"L x 91"W x 80"H Approximate Machine Weight: 8,160 LBS -EQUIPPED WITH- Lathe Max ...

  18. 2000 Milltronics ML 15 (CNC Tool Room Lathe)

    2000 Milltronics ML 15 CNC Tool Room Lathe Control: Centurion 6 Swing Over Bed: 15" Swing Over Cross Slide: 9" Distance Between Centers: 60" Chuck Size: 8" Spindle Nose: D1-6 Spindle Bore: 2.18" Spindle Seed: 3,000 RPM Spindle Motor: 7.5 HP -EQUIPPED WITH- Smart Dex 8-Position Turret More Info: http://2spade.com/2000MilltronicsML15.html

  19. 1994 Citizen CINCOM L20 (CNC Swiss Type Lathe)

    1994 Citizen CINCOM L20 CNC Swiss Type Lathe Control: Cincom System Chuck Collet Bar Capacity: .812" Turning Diameter: .812" Distance Between Centers: 8" Number of Turret Tools: 14 Maximum Drilling Diameter: .394" Spindle Speeds: 180-7,200 RPM Pick Off Spindle Motor: 2HP Minimum Spindle Index: 15 Deg (24 Positions) Rotary Tool Motor: 5HP Tools Mounted: 14, Turning: 5, Front Work I.D.: 3, Back Work I.D.:3, Live Tools: 3 Machine Approximate Weight: 3,300 LBS More Info: http ...

  20. 1994 Citizen CINCOM L16 (CNC Swiss Type Turning Center)

    1994 Citizen CINCOM L16 CNC Swiss Type Lathe Control: Cincom System Max. Machining Diameter .687" Max. Machining Length per One Chuck: 8.1" Max. Drilling Diameter: Up to .394" Spindle Speed: 200 - 10,000 rpm Back Work Max. Chucking dia. of Pick off Spindle .687" Back Work Pick off Spindle Speed: 200 - 5000 rpm Back Work Pick off Spindle Motor: 2 HP Back Work Min. Spindle Index: 1 Deg Number of OD Turn Tool Stations: 7 Number of Front ID Tool Stations: 3 Number of Back ID ...

  21. 1997 Bridgeport Romi EZ Path II CNC "Teach Type" Lathe

    1997 Bridgeport Romi EZ Path II CNC "Teach Type" Lathe Swing- 19.7 by 39.4" Centers ***VIDEO AVAILABLE*** Manufacturer: Bridgeport Model: Romi EZ Path II Year: 1997 Condition: Good! Specifications: Control Bridgeport EZ Path Control Swing 19.7" Swing Over Cross Slide 9.9" Distance between Centers 39.4" Spindle Nose A2-6 Hole Thru Spindle 2.6" Spindle Speeds (3) 4- 3,500 RPM Spindle Motor 10 HP Tailstock Quill Dia. 2.2" Tailstock Quill Travel 4.7" Tailstock Taper MT #4 Approx Dimensions 99" x 56 ...

  22. 2007 Romi M27 x 120 Combination CNC Lathe

    2007 Romi M27 x 120 Combination CNC Lathe Factory Specifications: Swing over Bed: 26.97” Swing over cross slide: 16.93” Center Distance: 121.1” Swing over carriage wings: 21.26” Travels: X = 18.7”, Z = 119.65” Bed Width: 15” Headstock: A2-11” Through hole: 6.7” Spindle RPM – 2 Ranges: 2-1000 Low RPM: 2-245, High Range RPM: 8-1000 Torque: 5275 FtLbs. Full HP at 56 RPM Rapid Traverse: X = 295 IPM, Z = 295 IPM Coolant Pump: 0.24 HP Coolant Reservoir: 132 Gal. Repeatability: X = .0002”, Z = .002” / ...

  23. Okuma Model Captain L370BBM CNC Live Milling Big Bore Lathe

    Okuma Model Captain L370BBM CNC Live Milling Big Bore Lathe (2008) 10" Chuck, Big Bore Option, Live Tool, Tailstock, Ship Conveyor, OSPP-200L Specifications (Preliminary) Max Diameter Bar Capacity:.........................2.75" Max Swing Over Bed:...................................20.86" Max Turning Diameter:.................................14.57" Max Machining Length..................................19.6" X-Axis Travel:................................................10.2" Z-Axis Travel:....... ...

  24. 1990 Motch 225D-VNC (CNC Vertical Turret Lathe)

    1990 Motch 225D-VNC CNC Vertical Turret Lathe Controls: Fanuc 11T Number of Turrets: 2 Number of Tables: 2 Chucks Size: 21" Swing & Turning Diameter: 25" X Axis Travels: 20" Z Axis Travels: 18" Spindles Speeds: 1 - 1,300 RPM Spindles Noses: A2-11 Spindles Motors: 50 HP Machine Weight: 37,000 LBS -EQUIPPED WITH- Chip Conveyors (2) CNC Controls (2) 21" 3-Jaw Chucks (2) 6 Station Tool Turrets More Info: http://2spade.com/1990Motch225DVNC.html

Be the first to get new results like these -