eBay Classifieds » All ads » For sale » Business & industrial » 

lathe in Newark

(0 ad found)

Categories
Price [clear]
$ to
    Ads

    Sorry, but no ads matched your search for "lathe" in your area.

    Be the first to get new results like these -

    Can't find what you are looking for in your area? See more ads from nearby cities.

    1. Hwacheon HL-580 (Manual Engine Lathe)

      Hwacheon HL-580 Manual Engine Lathe Swing Over Bed: 22.8” Swing In The Gap: 31” Swing Over Carriage: 14.1” Distance Between Centers: 79.5” Gap Length: 10.6” Width Of Bed: 16.5” Spindle Bore: 3.03” Spindle Speeds: 28 - 1350 RPM Spindle Motor: 15 HP Machine Dimensions: 145”L x 45”W x 59”H Machine Weight: 7,500 LBS More Info: http://2spade.com/HwacheonHL580.html

    2. 1980 Yamazaki MAZAK REX 30 (Manual Engine Lathe)

      1980 Yamazaki MAZAK REX 30 Manual Engine Lathe Swing Over Ways: 30" Swing Over Cross Slide/Carriage: 20-3/4" Distance Between Centers: 120" Spindle Speeds: 12 - 1,200 rpm Spindle Bore: 4-1/16" Spindle Motor: 20 hp -EQUIPPED WITH- 40-1/2" Swing Gap x 13-3/8" Inch, Metric, Witworth, & D.P. Threading Taper Attachment(Detatchee) Thread Dial Hardened & Ground Ways 18" 3-Jaw Chuck 24" 4-Jaw ...

    3. Haas ST-10 CNC Lathe, New 2014

      2014 Haas ST-10 CNC lathe no tailstock 6” 3 jaw chuck 12 station turret Auto tool probe 6,000 spindle RPM Parts catcher Chip conveyor 5C adapter w/ wrench 3J adapter w/ wrench Spindle liner adapter Rigid tapping Misc: turret tooling: (5) 1” ID holders (2) 1-1/4” ID holders (2) face groovers (4) 3J collets (7) tool wedges (20) coolant blocks 1020 hours servo on time. 284 hours in motion ...

    4. Haas ST-20 CNC Lathe, New 2011

      2011 Haas ST-20 CNC Turning Center No tailstock 12 station turret Auto tool probe / presetter Chip conveyor 8” 3 jaw chuck 1-3/4” spindle liner Misc. Turret tooling: (2) 1” ID holders (2) 1-1/4” ID holders (4) 1-1/2” ID holders (1) 2” ID holder Face groover (8) coolant blocks (10) tool block wedges 1025 hrs. Servo on time 340 hrs. in motion time 405 hrs. spindle time Located in a CT shop ...

    5. Poreba TR70B (Manual Engine Lathe)

      Poreba TR70B Manual Engine Lathe Swing Over Ways: 30" Distance Between Centers: 118" Spindle Bore: 3.25" EQUIPPED WITH- Threading Taper Attachment Rapid Traverse Carriage 24" 4-Jaw Chuck 20" 3-Jaw Chuck 22" Capacity Steady Rest 15" Capacity Steady Rest More Info: http://2spade.com/PorebaTR70B.html

    6. Axelson 25 x 144 Engine Lathe

      Axelson 25 x 144 Engine Lathe Maximum Swing over Bed: 28 ¾" Maximum Distance between Centers: 144" Bed Length: 18 FT Spindle Speeds: (24) 5 - 467 RPM Feeds: (36) 0.010 - 0.300 IPR (Inches per rotation) Surface Speeds: (18) 20 - 300 FPR (Feet per minute) Motor: 20 HP 220/440 More Info: http://2spade.com/Axelson25x144.html

    7. 1974 Bullard DYNATROL 46 (Vertical Turret Lathe)

      1974 Bullard DYNATROL 46 Vertical Turret Lathe Year of Make: 1974 Brand: Bullard Model: Dynatrol 46 Swing: 58” Height Under Rail: 40” Table Speed: 9-313 RPM Table Motor: 75 HP Equipped With: Ram & Turret More Info: http://2spade.com/1974BullardDYNATROL46.html

    8. Dimco PV45 (Manual Engine Lathe)

      Dimco PV45 Manual Engine Lathe Machine Type: A-61 Serial Number: 7762 Model Number: 297-44 Swing Over Bed: 36" Swing in Gap: 60" Distance Between Centers: 96" Spindle Hole: 3.5" Over All Length of Machine: 180" More Info: http://2spade.com/DimcoPV45.html

    9. Leblond 26 REGAL (Manual Engine Lathe)

      Leblond 26 REGAL Manual Engine Lathe Max Swing Over Bed: 26" Max Turning Diameter: 18.25" Distance Between Centers: 96" Lathe Bed Length: 102" Spindle Bore: 2.19" Spindle Speeds: 18-270 RPM Spindle Motor: 10 HP Wired For: 230/460 V, 60 HZ -EQUIPPED WITH- (1) 15" 6-Jaw Chuck (1) 24" 4-Jaw Chuck (1) 12.5" Face Plate Aloris Tool Post Accurite 200T 2 Axis DRO Tool Offsets Feature (1) Steady ...

    10. 1975 Bullard DYNATROL 46 (Vertical Turret Lathe)

      1975 Bullard DYNATROL 46 Vertical Turret Lathe Year of Make: 1975 Brand: Bullard Model: Dynatrol 46 Table Size: 46" Swing: 58” Height Under Rail: 40” Table Speed: 9-313 RPM Table Motor: 75 HP -EQUIPPED WITH- Ram & Turret More Info: http://www.2spade.com/1975BullardDYNATROL46.html

    11. 20"/25" X 80" MORI SEIKI GAP BED ENGINE LATHE * VERY NICE!

      20"/25" X 80" MORI SEIKI GEARED HEAD GAP BED ENGINE LATHE MODEL: MR-2000 NEW MID 70'S *WAYS ARE EXCELLENT! *RUNS EXCELLENT! *NEWALL DRO! *NO ISSUES - READY FOR YOUR SHOP! SPECIFICATIONS: SWING OVER BED ................ 20-1/2" SWING OVER CROSS SLIDE ........ 11-3/4" DISTANCE BETWEEN CENTERS ...... 80" SPINDLE SPEEDS (12) ........... 28 - 1,350 R.P.M. SPINDLE HOLE .................. 2-3/64" ...

    12. 1996 Motch 219-VNC (CNC Vertical Turret Lathe, Twin Spindle)

      1996 Motch 219-VNC CNC Vertical Turret Lathe, Twin Spindle Retrofitted in 1996 Fanuc series 16T CNC control with 14'' color screen 2-Axis carriage (2) 12'' woodworth pull-back chucks 25'' swing Vari-speed 0-1600 RPM 75 Hp spindle drive motor (2) 6 position tool turrets Quick switch holders More Info: http://2spade.com/1996Motch219VNC.html

    13. 2008 Willis 3280 ENC (Oil Country CNC Turning Center)

      2008 Willis 3280 ENC Oil Country CNC Turning Center Standard CNC Lathe Features: Fanuc Oi-TC control 8 position vertical electric turret or 4-position horizontal turret Wide RPM range 30HP Spindle Motor 4-Step Spindle Speed Cutting Fluid Coolant System Operation, Programming & Instruction Manuals Full Length Rear Splash Guard Front Chuck & Chip Safety Guards Working Lamp RS-232 ...

    14. 2004 Kent USA ML-1740T (Manual Engine Lathe)

      2004 Kent USA ML-1740T Manual Engine Lathe Swing Over Bed: 17” Swing Over Cross slide: 11” Swing Over Gap: 24.5” Width of Bed: 12" Distance Between Centers: 44” Cross Slide Travel: 12” Top Slide Travel: 4.75” Spindle Speeds: 12 Spindle Speed Range: 36–1800 RPM Through Hole Diameter: 3.125" Spindle Nose: D1–6 Spindle to Sleeve Taper: MT#7 – MT#4 Thread capacity (inches): 45, 2 ...

    15. 1988 Mazak SLANT TURN 40N-ATC M/C (CNC Lathe With Live Milling)

      1988 Mazak SLANT TURN 40N-ATC M/C Turning Center With Live Tooling Control: Fanuc 11T Chuck Size: 12" Max Diameter Bar Capacity: 2.75" Max Swing Over Bed: 21.25" Max Turning Diameter (Chucking / Shaft): 20.25" / 14.5" Distance Between Centers: 82" Spindle Motor: 30 / 20 HP AC Spindle Speed: 4 - 2200 RPM Spindle Bore: 3.15" Spindle Nose: A2-8 Spindle Torque: 1100 ft. lbs. Tools: 80 Rapid ...

    16. 1996 Kingston CL-38X1500 (CNC Engine Lathe)

      1996 Kingston CL-38X1500 CNC Engine Lathe Control: Fanuc OT Swing Over Bed: 26" Swing Over Cross: 14.6" Max Turning Length: 63" Spindle Speeds: 3 - 1,200 RPM Spindle Motor: 30 HP -EQUIPPED WITH- Tail Stock Steady Rest Tool Post More Info: http://2spade.com/1996KingstonCL38X1500.html FOR ALL SURPLUS CNC..............SURPLUSCNC.COM

    17. 1980's Mori-Seiki MH2000 Engine Lathe 24" x 80"

      1980's Mori-Seiki MH2000 Engine Lathe 24" x 80" Spindle speeds: 27 - 1205 RPM Motor: 10 HP Spindle bore: 3-1/8" Camlock spindle Swing over bed: 24" Swing over cross slide: 16" Hardened bedways Tailstock Steady rest 4-jaw chuck (comes with the machine but needs backing plate) 3-jaw chuck (mounted) 220 volt/3/60 Price: $19,500.00 In Very Good Condition!

    18. 2000 Kingston CL38C-2000 CNC Lathe

      This machine is located in the state of New York and the seller has asked us to handle the sale even though our sales office is located in Michigan. Thank You. Price: $85,000 Location: NY Reference #: 5747 Machine Type: CNC Lathe Year: 2000 Manufacturer: Kingston Model: CL38C-2000 Control: Fanuc 0T Condition: Good Under Power: Yes Capacity: Chuck Size: 24" Swing Over ...

    19. 1955 Bullard CUTMASTER 66 (Vertical Turret Lathe)

      1955 Bullard CUTMASTER 66 Vertical Turret Lathe Table Size: 66" Maximum Swing: 78" Spindle Speeds: 2.28 to 112.4 rpm Heads: Number Of Head(s): 2 Turret Head: 1 Ram Head: 1 -EQUIPPED WITH- Ram 5-Position Turret Pendant Control Accu-Rite DRO **Refurbished in 2010** More Info: http://2spade.com/1955BullardCUTMASTER66.html

    20. 17" X 40" BRIDGEPORT ROMI EZ PATH CNC/MANUAL TEACH LATHE

      17" X 40" BRIDGEPORT ROMI EZ PATH CNC/MANUAL TEACH LATHE WITH "EZ PATH S" PC BASED CONTROL NEW: 1997 ***VIDEO AVAILABLE*** SPECIFICATIONS: SWING OVER BED......................... 16.96" DISTANCE BETWEEN CENTERS............... 40" SWING OVER CROSS SLIDE................. 8" CROSS SLIDE TRAVEL .................... 8.6" SPINDLE NOSE........................... ASA A2-5" SPINDLE BORE........... ...

    21. Okuma 46" x 246" Engine Lathe

      1980 Okuma 46" x 246" Engine Lathe Swing Over Ways: 46" Swing Over Cross Slide: 36 " Distance Between Centers: 246" Spindle Speed: 12~1,000 rpm Spindle Bore: 3" Chuck Diameter: 36" Number of Jaws: 4 Equipped With- 36" 4-Jaw Chuck 22" Steady Rest 15" Steady Rest Inch/Metric Threading Taper Attachment

    22. Tos SN 50 C  (Engine Lathe)

      Tos SN 50 C Manual Engine Lathe Swing over bed: 20” Swing over carriage: 10.6” Spindle bore: 2-1/8” Center distance: 80” Voltage: 220/3/60 Horse power: 7.5 Equipped With- Digital Read Out Tail Stock More Info: http://www.2spade.com/TosSN50C.html

    23. 2006 Romi M 20 (CNC Tool Room Lathe)

      2006 Romi M 20 CNC Tool Room Lathe Control: Fanuc 21i-T Swing Over Bed: 20" Swing Over Cross: 10" Centers Distance: 62" x Axis Travel: 11" z Axis Travel: 60" Spindle Hole: 2.5" Spindle Nose: A2-6 Spindle Speeds: 2,200 RPM Spindle Motor: 15 HP Number of Turret Postions: 8 Electrics: 230 V, 3 PH, 50/60 HZ Approx Dimensions: 143"L x 65"W x 65"H Machine Weight: 7,750 LBS ...

    24. 1987 Summit 26X180 (Manual Engine Lathe)

      1987 Summit 26X180 Manual Engine Lathe Swing Over Ways: 26" Distance Between Centers: 180" Spindle Bore: 4-1/4" Chuck Diameter (4 Jaw): 20" -EQUIPPED WITH- Inch/Metric Threading Taper Attachment 20" 4-Jaw Chuck (1) Steady Rest More Info: http://2spade.com/1987Summit26X180.html

    Be the first to get new results like these -